Return to Hub
Hardware
SILICON LAYER
Custom boards from schematic to a working PCB. MIPI, eDP, and power rails — designed, fabricated, and brought up in-house.
Custom PCB · TI SN65DSI86 · NanoPi M6
DSI → eDP BRIDGE
LIVE
EasyEDA · 4-layer · JLCPCB assembled
A 4-layer bridge that takes MIPI DSI from a NanoPi M6 and drives an eDP panel. Schematic, layout, DFM, assembly, and a board that actually lights the display.
U1 is TI SN65DSI86: DSI-A four-lane in, two-lane eDP out. J1 is a 30-pin 0.5 mm FFC to M6 DSI0 (CON22). J2 is the panel connector. J3 is the backlight input. Dedicated 1.2 V / 1.8 V rails and a 12 V backlight path. Designed in EasyEDA, built at JLCPCB — first assembled boards are running.
SN65DSI86MIPI DSIeDP4-layer PCBNanoPi M6EasyEDAJLCPCB
4
Layers
DSI86
Bridge
M6
Host
Works only with NanoPi M6 on stock FriendlyElec Debian, kernel 6.1.141. Other boards and kernels are not supported.
// Tagos Labs · USA · 2026
// SIGNAL PATH
NanoPi M6 DSI0 → J1 30P FFC
U1 SN65DSI86 → 4-lane DSI-A
eDP ML0 / ML1 → J2 panel
Rails 1.2 / 1.8 / 12 V backlight
Hardware · Tagos Labs 2026